Installing Memory Modules - Dell PowerEdge M830 Owner's Manual

Blade server
Hide thumbs Also See for PowerEdge M830:
Table of Contents

Advertisement

Figure 14. Removing the memory module
1.
memory module
3.
memory module socket ejector (2)
Next steps
1.
Install the memory module.
NOTE: If you are removing the memory module permanently, install a memory module blank.
2.
Install the cooling shroud.
3.
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Removing the cooling shroud

Installing memory modules

After working inside your system
Installing memory modules
Prerequisites
WARNING: The memory modules are hot to touch for some time after the system has been
powered down. Allow the memory modules to cool before handling them. Handle the memory
modules by the card edges and avoid touching the components or metallic contacts on the
memory module.
74
2.
memory module socket

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge fc830Fhb

Table of Contents