Installing A Hard Drive Or Ssd Blank - Dell PowerEdge M830 Owner's Manual

Figure 45. Removing a 1.8-inch SSD blank
1. SSD blank
Next steps
1. Install the hard drive or SSD.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system

Installing a hard drive or SSD blank

After working inside your system
Installing a hard drive or SSD blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove a hard drive or SSD.
Steps
Insert the hard-drive or SSD blank into the hard drive or SSD slot until the release latch clicks into
place.
112
2. release latch