Drive-status indicator pattern
Flashes green, amber, and turns off
Flashes amber four times per second
Steady green
Flashes green for three seconds, amber for
three seconds, and turns off after six seconds
iDRAC Direct LED indicator codes
NOTE: The iDRAC Direct LED indicator does not turn on when the USB port is used in the USB
mode.
Figure 5. iDRAC Direct LED indicator
1.
iDRAC Direct status indicator
The iDRAC Direct LED indicator table describes iDRAC Direct activity when configuring iDRAC Direct by
using the management port (USB XML Import).
Table 4. iDRAC Direct LED indicator
Convention
iDRAC Direct
LED indicator
A
Green
B
Flashing green
C
Green and turns
off
Condition
NOTE: The drive status indicator remains off until
all hard drives are initialized after the system is
turned on. Drives are not ready for insertion or
removal during this time.
Predicted drive failure
Drive failed
Drive online
Rebuild aborted
Condition
Turns green for a minimum of two seconds to indicate the start and
end of a file transfer.
Indicates file transfer or any operation tasks.
Indicates that the file transfer is complete.
13