5. Advanced
Quick check of the active stereo image
1. Make sure that both previous procedures in this section have been performed in a correct way.
2. Open the Source selection drop down menu: both the connectors that have been linked to the Sources should have a bullet to
indicate that they are currently displayed.
Source selection
L1 PC
L1 DVI
L3 DVI-1
L3 DVI-2
Image 5-39
Two sources displayed simultaneously (bullet); one source available (Barco logo)
3. Browse to Installation > Scaled patterns and select Moving Hatch...
Image 5-40
You should now see the Moving Hatch pattern and the Left image content at the same time.
5.5
Image files
Overview
•
Introduction to Image files
•
Load file
•
Forced file load
•
Auto Image
•
Edit
•
Save as (create a custom file)
•
Rename file
•
Copy
•
Delete
5.5.1
Introduction to Image files
Image files
An image file contains the main characteristics of a source (number of active lines,...). The projector's memory contains a list of files
corresponding to the most common sources : standard files.
70
R59770718 GALAXY NW SERIES 20/06/2013