Conventions; Air Flow - Barco XDX Series Installation Manual

System overview

2.1 Conventions

Convention projector orientation
This manual refers to the light source side of the projector as the side at your left hand when standing behind
the projector and looking at the projection screen in front of the projector.
Image 2–1
T Top of the projector.
L Left side of the projector (Light source side).
F Front of the projector.

2.2 Air flow

Air flow projector
The XDX projector has two air outlets and three air inlets. The air inlets are located on the front side and
bottom side of the projector. The air outlets are located on the top and on the back side of the projector.
Take into account the location of the air inlets and outlets when determining a suitable location to install the
projector. Make sure that when installed, the hot air coming from the air outlets is not automatically sucked
back in via the air inlets.
20 R5914481 /02 XDX
R Right side of the projector (User input side).
B Back side of the projector.