Status Bar Position; Sliderbox Position - Barco R9010300 Owner's Manual

13.6 Status bar position

What can be done ?
The status bar (wizard menu) can be centered vertically. The range is from the bottom of the screen to the middle of the screen.
Image 13-10
Status bar position
This is useful in applications where the bottom image content is not displayed (e.g. due to blanking).
How to center the menu ?
1. Press MENU to activate the menu bar.
2. Press → to select the Display setup item. (image 13-11)
3. Press ↓ to pull down the Display setup menu.
4. Use ↑ or ↓ to select Status bar position.
5. Press ENTER.
6. Use ↑ or ↓ to position the status bar
Image 13-11

13.7 Sliderbox position

What can be done ?
The sliderbox can be displayed anywhere on the screen. The exact location can be set in sliderbox menu due to the coarse and
fine adjustment.
How to reposition the sliderbox?
1. Press MENU to activate the menu bar.
2. Press → to select the Display setup item. (image 13-12)
3. Press ↓ to pull down the Display setup menu.
4. Use ↑ or ↓ to select Sliderbox position.
5. Press ENTER to confirm.
A sliderbox is displayed. Use the 4 arrow keys to move the box to the desired position.
The X and Y coordinate will change simultaneously while moving the box. (image 13-13)
R5976817 RLM H5 17/01/2005
13. Display Setup
123