Panasonic KX-TDA100 Feature Manual page 84

1.4 D
• DISA Automatic Walking COS
– The KX-TDA6920, KX-TDA0920 or KX-TDA5920 SD Memory Card for Software Upgrade to
Enhanced Version is required to use this feature.
• Each outgoing message (OGM) can be assigned a name through system programming for
programming reference.
→ 2.11.4 [5-3-2] Voice Message—DISA Message—Name
→ [731] Outgoing Message (OGM) Name
[MPR Software File Version 3.0000]
The following information describes the differences between MPR Software File Version 3.0000 and
3.1000.
• DISA Intercept Routing—No Dial
If the caller fails to dial any digits within a preprogrammed time period (DISA 1st Dial Time for Intercept)
after hearing the outgoing message (OGM), the call is redirected to the operator extension.
• DISA Intercept Routing—Busy/DND
If the destination called by the outside party is busy or in DND mode, and if (1) the busy destination
does not set Call Waiting, FWD, or Idle Extension Hunting or (2) the destination is in DND mode and
Idle Extension Hunting is not available, one of the following can be selected through system
programming:
– Busy Tone: A busy tone will be sent to the caller.
– Intercept: Intercept Routing—Busy/DND will redirect the call to the preprogrammed destination on
an extension basis.
– OGM: An outgoing message (OGM) will be sent to the caller. The message for busy/DND mode
can be assigned for each outgoing message (OGM) which has a DISA floating extension number.
2.11.3 [5-3-1] Voice Message—DISA System
→ DISA Intercept—Intercept when Destination through DISA is Busy (not available for
MPR Software File Version 3.1000 or later)
→ DISA Intercept—Intercept when Destination through DISA sets DND
• When all DISA ports are busy, the call is redirected to the Intercept Routing destination assigned to the
trunk group.
Installation Manual References
KX-TDA50
2.5.3 MSG2 Card (KX-TDA5191)
KX-TDA100/KX-TDA200
2.6.1 OPB3 Card (KX-TDA0190)
2.6.5 MSG4 Card (KX-TDA0191)
KX-TDA600
2.8.1 OPB3 Card (KX-TDA0190)
2.8.4 MSG4 Card (KX-TDA0191)
Programming References
PC Programming Manual
2.8.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf
→ DISA—Delayed Answer Timer
→ DISA—Mute & OGM Start Timer after Answering
→ DISA—No Dial Intercept Timer
84 Feature Manual