Panasonic KX-TDA100 Feature Manual page 40

1.3 C
• Display Lock
The Incoming Call Log of an extension can be locked through personal programming (Directory and
Call Log Lock) to prevent other users from viewing its contents. In this case, the Outgoing Call Log
display, the Personal Speed Dialing number display and the SVM Log display are also locked, and the
voice messages in the user's message box cannot be played back.
An extension personal identification number (PIN) is required to use this feature. (→ 1.5.6 Extension
PIN (Personal Identification Number))
• Incoming Call Log Memory
The total number of incoming calls that can be logged by the PBX is limited. The maximum number of
calls that can be logged in the Incoming Call Log of each extension and ICD group can be specified
through system programming. When a call log is full, the oldest call will be replaced each time a call is
received.
• Automatic Caller ID Number Modification
If the PBX is programmed to automatically modify incoming telephone numbers, the modified numbers
will be logged in the Incoming Call Log.
• Incoming Call Log for Calls to an ICD Group
If a call directed to an ICD group is not answered, the call is logged in the Incoming Call Log of the ICD
group. If the call is answered, it is logged in the call log of the answering extension only.
[MPR Software File Version 3.1000 or later]
• Through system programming, it is possible to select which Incoming Call Logs record call information
when a member of an ICD group answers a call to the group:
– Only the Incoming Call Log of the extension that answered the call.
– Both the Incoming Call Log of the extension that answered the call and that of the ICD Group.
Programming References
PC Programming Manual
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD—Incoming Call
Log Memory
2.9.11 [3-5-3] Incoming Call Distribution Group—Miscellaneous—Options—Call Log to ICD Group for
Answered Call (MPR Software File Version 3.1000 or later)
2.10.1 [4-1-1] Wired Extension—Extension Settings
→ Option 5—Incoming Call Display
→ Option 6—Incoming Call Log Lock (KX-TDA100/KX-TDA200/KX-TDA600 only)
→ Option 7—Incoming Call Log Memory
2.10.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Ext. No. / Floating Ext. No. (for Call Log)
2.10.10 [4-2-1] Portable Station—Extension Settings
→ Option 5—Incoming Call Display
→ Option 7—Incoming Call Log Memory
2.10.17 [4-3] DSS Console—Flexible Button
→ Type
→ Ext. No. / Floating Ext. No. (for Call Log)
PT Programming Manual
None
40 Feature Manual