Dnd (Do Not Disturb) - Panasonic KX-TDA100 Feature Manual

2.8.17 [2-9] System Options—Option 5—PT Feature Access—No. 1–8
2.10.1 [4-1-1] Wired Extension—Extension Settings
→ Option 4—Display Language
→ Option 5—Incoming Call Display
→ Option 5—Automatic LCD Switch when Start Talking
2.10.10 [4-2-1] Portable Station—Extension Settings
→ Option 4—Display Language
→ Option 5—Incoming Call Display
→ Option 5—Automatic LCD Switch when Start Talking
2.16.1 [10-1] CO Line Settings—CO Name
PT Programming Manual
None
Operating Manual References
3.1.2 Personal Programming
1.4.9

DND (Do Not Disturb)

Description
An extension user can make use of the DND feature. If this feature is set, calls will not arrive at the
extension, but will arrive at another extension using the Idle Extension Hunting feature (→ 1.9.9 Idle
Extension Hunting) or the Intercept Routing—Busy/DND feature (→ 1.9.11 Intercept Routing). When a
destination cannot be found, the calling extension will hear the DND tone, while the calling outside party will
hear a busy tone.
Conditions
• DND for CO Line Calls/Intercom Calls
The DND feature can be set for CO line calls, for intercom calls, or for both of them by the extension
user.
• DSS button in DND Mode
The DSS button light will turn red if the assigned extension has set DND.
• DND Override
An extension in DND mode can be called by other extension users who are allowed to override DND
in their COS.
• Paging DND
It is programmable whether the PBX pages extensions in DND mode through system programming. (→
1.13.1 Paging)
• Intercept Routing—Busy/DND
If a call arrives at an extension in DND mode, the call can be redirected to a preprogrammed destination
by the Intercept Routing—Busy/DND feature.
• Idle Extension Hunting
While searching for an idle extension within an idle extension hunting group, any extension that has
DND set will be skipped. The call will go to the next extension in the group, not the Intercept Routing—
Busy/DND destination.
1.4 D
Feature Manual 87