Panasonic KX-TDA100 Feature Manual page 56

1.3 C
Method
Idle Line Access
(Local Access)
Trunk Group Access
S-CO Line Access
Conditions
• Class of Service (COS) programming determines the trunk groups available for making calls.
• CO Line numbers can be referred on a CO line port basis.
• Button Assignment
A flexible button can be customized as a G-CO, L-CO, or S-CO button as follows:
Type
Loop-CO (L-CO)
Group-CO (G-CO)
Single-CO (S-CO)
It is possible to assign:
– the same CO line to the S-CO button and to a G-CO button.
– the same trunk group to more than one G-CO button.
– more than one L-CO button.
Dialing the CO Line Access number selects a CO button according to the following priority: S-CO → G-
CO → L-CO
• Direct CO Line Access
If an extension user is on-hook when pressing an idle CO button, the proprietary telephone (PT)
automatically enables hands-free operation mode. The user can dial without lifting the handset or
pressing the SP-PHONE button or MONITOR button.
• Group Hunting Order for Idle Line Access
An idle CO line is selected from the trunk groups assigned for Idle Line Access. If multiple trunk groups
are available, the trunk group hunting sequence can be determined through system programming.
• CO Line Hunting Order for Idle Line Access and Trunk Group Access
The CO line hunting sequence in a trunk group (from lowest numbered CO line, from highest numbered
CO line or rotation) can be determined through system programming.
• A company name or customer name can be assigned on a CO line port basis so that the operator or
extension user who is answering the call can view the destination which the caller is trying to reach
before answering. This is useful, for example, when multiple companies share the same operator.
• It is possible to identify the CO line port that has a CO line connected to it. This prevents extension
users from originating a call to a CO line which is not connected.
56 Feature Manual
Description
Selects an idle CO line automatically
from the assigned trunk groups.
Selects an idle CO line from the
corresponding trunk group.
Selects the desired CO line directly.
Any trunk group that is made available for Idle Line Access through
system programming is applied.
A trunk group is assigned.
A specified CO line is assigned.
Operation
Dial the Idle Line Access number or
press a L-CO button.
Dial the Trunk Group Access number
and a trunk group number, or press a G-
CO button.
Dial the S-CO Line Access number and
the CO line number, or press the S-CO
button.
Assignable parameter