Panasonic KX-TDA100 Feature Manual page 72

1.4 D
[Programming Example: DID Table]
Location DID No.
123-4567
1
2 123-2468
→ 2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—DID Number
*1
:
→ [451] DID Number (KX-TDA100/KX-TDA200/KX-TDA600 only)
→ 2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—DID Name
*2
:
→ [452] DID Name (KX-TDA100/KX-TDA200/KX-TDA600 only)
→ 2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—CLI Ring for DID—Day, Lunch,
*3 :
Break, Night
→ 2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—DID Destination—Day, Lunch,
*4
:
Break, Night
→ [453] DID Destination (KX-TDA100/KX-TDA200/KX-TDA600 only)
In this example:
If the DID number is "123-4567":
1)
The PBX looks for the DID number in the table and finds it in location 1.
2)
The PBX checks the time mode.
In day mode: Calling Line Identification (CLI) distribution is enabled. The call is routed to its CLI
destination, if assigned. If not assigned, the call is routed to the DID destination, extension 105,
and "Sales" is displayed.
In lunch mode: CLI distribution is disabled. The call is routed to the DID destination, extension 100,
and "Sales" is displayed.
Note
Tenant numbers and VPS trunk group numbers (not shown here) can also be programmed in the DID
Table.
The tenant number programmed here is used only to determine the Time Table used by each DID
number; selecting tenant 3 means the DID number will use Time Table 3, for example. The VPS trunk
group number set here is used to determine the Incoming Call Service and greeting message used by
the Voice Processing System (VPS) during the current time mode. (→ 1.19.4 Voice Mail DPT (Digital)
Integration).
Conditions
• To use this feature, DID must be assigned as the distribution method for the desired CO line port.
Programming References
PC Programming Manual
2.8.4 [2-3] Timers & Counters—Miscellaneous—Receiving Dial Inter-digit Timer—DID (KX-TDA100/KX-
TDA200/KX-TDA600 only)
2.16.2 [10-2] DIL Table & Port Settings—DID/TIE
→ Distribution Method (KX-TDA100/KX-TDA200/KX-TDA600 only)
→ DID/TIE—Remove Digit
72 Feature Manual
CLI Distribution
DID
*1
Name
*2 Day Lunch
Enable Disable
Sales
Enable Disable
Judy
*3
Break Night Day
Enable Disable 105
Disable Disable 102
DID Destination
*4
Lunch Break Night
100 105 100
100 102 100