Panasonic KX-TDA100 Feature Manual page 280

1.16 S
Number in
the Pattern
(9)
(10)
The following data can be controlled through system programming to adjust whether (or how) they are
printed or displayed by SMDR
[Programmable Items]
Outgoing CO line call
Incoming CO line call
Outgoing intercom call
Log-in/Log-out status
ARS dial
Caller's identification
280 Feature Manual
Data
CD (Condition Shows other call information using the following codes:
Code)
TR: Transfer
FW: Call Forwarding (FWD) to CO line
D0: Call using Direct Inward System Access (DISA) or TIE line
service
RM: Remote maintenance (modem) (→ 1.13.6 PC Programming)
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual Caller ID)
Cost Shows the call charge. This is not available if your telephone
company does not provide a call charge reporting service.
Item
Controls whether outgoing CO line calls are shown. This setting is
common throughout the PBX. COS programming is also required.
→ 2.17.1 [11-1] Main—SMDR—Print Information—Outgoing Call
→ [804] SMDR Outgoing Call Printing
Controls whether incoming CO line calls are shown.
→ 2.17.1 [11-1] Main—SMDR—Print Information—Incoming Call
→ [805] SMDR Incoming Call Printing
Controls whether outgoing intercom calls are recorded.
→ 2.17.1 [11-1] Main—SMDR—Print Information—Intercom Call
Controls whether the Log-in/Log-out status of extensions is
recorded.
→ 2.17.1 [11-1] Main—SMDR—Print Information—Log-in / Log-
out
Controls whether the user-dialed number or the ARS-modified
number is shown.
The Host PBX Access code ("=" followed by the access code) can
be shown (as supplementary information) only when the modified
number is selected in this setting. (→ 1.1.3 ARS (Automatic Route
Selection))
→ 2.17.1 [11-1] Main—SMDR Options—SMDR Options—ARS
Dial
Controls whether the caller's identification number, name, number
and name, or nothing is shown. If "none" is selected, <I> will not
be shown.
→ 2.17.1 [11-1] Main—SMDR Options—SMDR Options—Caller
ID Number & Name
Description
Description