Panasonic KX-TDA100 Feature Manual page 281

Item
DID number
Secret dialing
Date order
Received call
Answered call
Room status
Timed Reminder call
Printing Message
Time format
Conditions
• SMDR Format
The following SMDR format parameters can be set through system programming in order to match the
paper size being used by the printer:
a)
Page Length: determines the number of lines per page.
→ 2.17.1 [11-1] Main—SMDR—SMDR Format—Page Length (Number of Lines)
→ [802] SMDR Page Length
Controls whether the DID numbers, names, numbers and names,
or nothing is shown. If "none" is selected, <D> will not be shown.
→ 2.17.1 [11-1] Main—SMDR Options—SMDR Options—DID
Number & Name (KX-TDA100/KX-TDA200/KX-TDA600)
Controls the display of secret dialing, when ARS dial above, is set
to show ARS-modified numbers. If enabled, numbers dialed
secretly will be shown as dots.
If ARS dial is set to show the user-dialed numbers, secretly dialed
numbers are always shown as dots in SMDR, regardless of this
setting.
→ 2.17.1 [11-1] Main—SMDR Options—SMDR Options—Secret
Dial
Controls the date format (MM-DD-YY, DD-MM-YY, YY-MM-DD,
YY-DD-MM)
→ 2.17.1 [11-1] Main—SMDR—SMDR Format—Date Format
Controls whether the time of receiving an incoming CO line call is
shown.
→ 2.17.1 [11-1] Main—SMDR Options—SMDR Options—
Condition Code "RC/VR"
Controls whether the time of answering an incoming CO line call is
shown.
→ 2.17.1 [11-1] Main—SMDR Options—SMDR Options—
Condition Code "AN/VA"
Controls whether room status changes are shown.
→ 2.17.1 [11-1] Main—SMDR—SMDR for External Hotel
Application 1—Room Status Control
Controls whether Timed Reminder calls are shown. (→ 1.17.4
Timed Reminder)
→ 2.17.1 [11-1] Main—SMDR—SMDR for External Hotel
Application 1—Timed Reminder (Wake-up Call)
Specifies the messages that can be selected from an extension.
(→ 1.13.11 Printing Message)
→ 2.12.9 [6-8] Hotel—Main—SMDR for External Hotel Application
2—Printing Message 1–8
Controls whether time is displayed in 12-hour or 24-hour format.
→ 2.17.1 [11-1] Main—SMDR—SMDR Format—Time Format
(12H / 24H)
Description
Feature Manual
1.16 S
281