Panasonic KX-TDA100 Feature Manual page 61

Type
Tone 3-1
Tone 3-2
Tone 4-1
Tone 4-2
Tone 5
Conditions
• Confirmation Tone Patterns
All confirmation tone patterns have a default (→ 2.3 Tones/Ring Tones).
• It is possible to eliminate each tone.
Programming References
PC Programming Manual
2.8.17 [2-9] System Options—Option 3
→ Confirmation Tone—Tone 1 : Doorphone / Called by Voice
→ Confirmation Tone—Tone 2 : Paged / Automatic Answer
→ Confirmation Tone—Tone 3-1 : Start Talking after making call
→ Confirmation Tone—Tone 3-2 : Start Talking after answering call
→ Confirmation Tone—Tone 4-1 : Start Conference
→ Confirmation Tone—Tone 4-2 : Finish Conference
→ Confirmation Tone—Tone 5 : Hold
PT Programming Manual
None
a)
Sent before a conversation is established using the Paging
feature.
b)
Sent to the caller when a conversation is established with an
extension in one of the following modes:
• Hands-free Answerback mode
• Voice-calling mode (Alternate Receiving—Ring/Voice)
c)
Sent when making a call to or from a doorphone.
Sent before a conversation is established when accessing the
following features by their feature numbers:
• Call Park Retrieve
• Call Pickup
• Hold Retrieve
• Paging Answer
• Trunk Answer From Any Station (TAFAS)
Sent when a call changes from a two-party call to a three-party call
(e.g., Executive Busy Override, Conference, Privacy Release, Two-
way Record).
Sent when a call changes from a three-party call to a two-party call
(e.g., Executive Busy Override, Conference, Privacy Release, Two-
way Record).
Sent when a call is placed on hold (including a consultation hold).
Description
Feature Manual
1.3 C
61