Panasonic KX-TDA100 Feature Manual page 273

[Ring Tone Pattern Table]
The ring tone pattern table is categorized into three parts, each containing a specified number of pattern
plans.
The ring tone pattern table is categorized as follows:
• Incoming CO Line Calls: each pattern plan can assign a ring tone pattern for each trunk group.
→ 2.8.14 [2-8-1] Ring Tone Patterns—Call from CO
• Incoming Doorphone Calls: each pattern plan can assign a ring tone pattern for each doorphone.
→ 2.8.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
• Others: each pattern plan can assign a ring tone pattern for incoming intercom calls as well as ring
tones assigned to certain features (e.g., timed reminder).
→ 2.8.16 [2-8-3] Ring Tone Patterns—Call from Others
The ring tone patterns that arrive at an extension are determined by the pattern plan that is assigned to that
extension through system programming.
[Programming Example of Ring Tone Pattern Table]
CO Line Call/Hold
Intercom
Table
Call/Hold
No.
Recall
TRG1
1 Double Single
2 Single Double
: :
Conditions
• "PT Ring off Setting" can be enabled or disabled through system programming. If disabled, PT
users cannot turn incoming call ringing off for their extension.
Programming References
PC Programming Manual
2.8.14 [2-8-1] Ring Tone Patterns—Call from CO—Ring Tone Pattern Plan 1–8
2.8.15 [2-8-2] Ring Tone Patterns—Call from Doorphone—Ring Tone Pattern Plan 1–8
2.8.16 [2-8-3] Ring Tone Patterns—Call from Others—Extension—Ring Tone Pattern Plan 1–8
2.8.17 [2-9] System Options—Option 1—PT Operation—PT Ring Off Setting
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table
2.10.10 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table
PT Programming Manual
None
Feature Manual References
2.1 Capacity of System Resources
Doorphone Call
Recall
TRG2 ... Port 1
Single
Double
: : : :
Timed
Reminder
Port 2 ...
: : :
1.15 R
External
Call Back LCS
Sensor
: :
Feature Manual
:
273