Conditions
•
A maximum of four hotel operators can be assigned.
•
Only one of each type of Room Status Control button can be assigned.
•
Extensions associated with rooms must be one of the following types:
PT (including IP-PT), SLT, T1-OPX
PSs cannot be checked in and out as room extensions.
•
When using extensions to represent guest rooms, it is recommended to set the extension number of a
room extension is the same as the room number, for convenience.
•
If enabled through system programming, check-in and check-out information is recorded by SMDR.
Programming References
PC Programming Manual
2.10.5 [4-1-4] Wired Extension—Flexible Button—Type
2.10.17 [4-3] DSS Console—Flexible Button—Type
2.12.9 [6-8] Hotel—Main—Hotel Operator—Extension 1–4
PT Programming Manual
None
Feature Manual References
1.5.4 Extension Dial Lock
1.15.1 Redial, Last Number
1.16.1 SMDR (Station Message Detail Recording)
1.17.4 Timed Reminder
Operating Manual References
1.3.59 Room Status Control
1.15 R
Feature Manual
275