Flash/Recall/Terminate - Panasonic KX-TDA100 Feature Manual

1.6.2

Flash/Recall/Terminate

Description
A proprietary telephone (PT) user can use the FLASH/RECALL button (Flash/Recall mode or Terminate
mode) or Terminate button (Terminate mode) to disconnect the current call and originate another call
without hanging up.
Flash/Recall Mode: Disconnects the line and the extension user hears the dial tone from the line used last.
For example, if a CO line call is disconnected, the extension user will hear a new dial tone from the same
CO line.
Terminate Mode: Disconnects the line and the extension user hears a dial tone via the preferred CO line.
(→ 1.10.3 Line Preference—Outgoing)
Conditions
• FLASH/RECALL Button Mode
One of the following modes can be selected for each extension through system programming:
– Flash/Recall mode
– Terminate mode
– EFA mode. (→ 1.5.1 EFA (External Feature Access))
• Terminate Button
Any flexible button can be customized as the Terminate button.
• Disconnect Time (Only for Flash/Recall Mode)
The amount of time between successive accesses to the same CO line is programmable for each CO
line port.
• This feature generates a Station Message Detail Recording (SMDR) call record (→ 1.16.1 SMDR
(Station Message Detail Recording)), restarts the call timer, inserts a pause, and checks the Toll
Restriction (TRS) level (→ 1.17.6 TRS (Toll Restriction)) again.
• The Terminate feature will be performed when pressing the FLASH/RECALL button regardless of the
mode that the FLASH/RECALL button has been set to, in the following situations:
– When a call is made using ARS. (→ 1.1.3 ARS (Automatic Route Selection))
– When a CO line call is made with the INTERCOM button.
– When a CO line call is made with an Incoming Call Distribution (ICD) group button.
Programming References
PC Programming Manual
2.7.11 [1-1] Slot—LCO Port—Disconnect Time
2.7.17 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Disconnect Time
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 6—Flash Mode during CO Conversation
2.10.5 [4-1-4] Wired Extension—Flexible Button—Type
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 6—Flash Mode during CO Conversation
2.10.13 [4-2-3] Portable Station—Flexible Button—Type
2.10.17 [4-3] DSS Console—Flexible Button—Type
PT Programming Manual
[418] LCOT Disconnect Time
1.6 F
Feature Manual 105