Conference - Panasonic KX-TDA100 Feature Manual

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA100:
Table of Contents

Advertisement

Feature Manual References
1.3.19 COS (Class of Service)

1.3.16 Conference

Description
An extension user can establish a conference call by adding additional parties to an already existing two-
party conversation. This PBX supports three-party through eight-party conference calls. Conferences with
more than four parties are only possible when a PT user originates the conference.
Unattended Conference:
The conference originator can leave the conference and allow other parties to continue. Establishing an
Unattended Conference allows the originator to return to the conference. Unattended Conferences can only
be established by PT users.
Conditions
When an extension is establishing a conference call the original party is put on hold.
CONF (Conference) Button
For a PT which does not have the CONF button, a flexible button can be customized as the Conference
button.
Unattended Conference Call Duration
The length of time that a conference call can remain unattended is restricted by the following timers:
Callback Start Timer
Warning Tone Start Timer
Disconnect Timer
These timers behave and operate according to the following chain of events:
1)
When the unattended conference is established, the Callback Start Timer will begin.
2)
When the Callback Start timer expires, the Unattended Conference originator's extension will start
to receive a callback ringing from the PBX and the Warning Tone Start Timer begins.
3)
When the Warning Tone Start Timer expires, the remaining parties of the conference will start to
hear a warning tone, the callback ringing will continue to be heard at the Unattended Conference
originator's extension, and the Disconnect Timer begins.
4)
When the disconnect Timer expires, the conference is disconnected.
If the Unattended Conference originator returns to the conference before the line is disconnected, all
timers are cleared.
For a Conference With Six or More Parties
The EECHO or ECHO card is required. Also the echo canceling function should be enabled through
system programming.
Installation Manual References
KX-TDA50
2.5.2 ECHO8 Card (KX-TDA5166)
KX-TDA100/KX-TDA200
2.6.4 ECHO16 Card (KX-TDA0166)
1.3 C
Feature Manual
59

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda50Kx-tda600Kx-tda200

Table of Contents