Panasonic KX-TDA100 Feature Manual page 331

→ 2.9.18 [3-8-1] VM(DTMF) Group—System Settings—Others—Message Waiting Lamp Control
When the PBX is selected, the Message Waiting feature is canceled after the extension user has
accessed the VPS. When the VPS is selected, the Message Waiting feature is canceled after the
extension user has listened to messages stored in his mailbox.
[Performance of Pressing the MESSAGE Button]
In AA Service Mode
Switching to VM command + Listening message
command
(#6 + H [H = Mailbox No.])
[Example]
PBX
Pressing the
MESSAGE
button
Extn. 102
4.
AA Service
If the VPS transfers the call using the AA service, the PBX will inform the VPS of the status of the called
destination with the preprogrammed DTMF status signal so that the VPS can confirm the status of the
extension without listening to the system tones (e.g., ringback tone).
Assign the DTMF status signal to suit the VPS settings.
[DTMF Status Signals and Conditions]
Status
RBT (ringback tone)
BT (busy tone)
ROT (reorder tone)
DND (DND tone)
Answer
FWD VM RBT (FWD to
Voice Mail ringback tone)
FWD VM BT (FWD to
Voice Mail busy tone)
Transmitted Command
Sent "#6" + " ", "102".
Switching to VM command
VPS (In AA
service mode)
Mailbox for
Extn. 102
Condition
The PBX is ringing the corresponding extension.
The called extension is busy.
The dialed number is invalid.
The called extension has set DND. (→ 1.4.9 DND (Do
Not Disturb))
The called extension has answered the call.
The called extension has set FWD to VPS and the
PBX is calling another port of the VPS.
The called extension has set FWD to VPS and all
ports of the VPS are busy.
In VM Service Mode
Listening message command ( H [H = Mailbox
No.])
Listening message
command, mailbox number
1.19 V
Default
Command
1
2
3
4
5
6
7
Feature Manual 331