Printing Message - Panasonic KX-TDA100 Feature Manual

1.13 P
button. (→ 1.16.3 Speed Dialing, Personal) In this case, the extension will enter personal programming
mode automatically so that a name can be assigned to the stored number.
Operating Manual References
3.1.2 Personal Programming

1.13.11 Printing Message

Description
An extension user can select a message to be output on SMDR. Up to eight messages can be
preprogrammed in the Printing Message table, and are available to all extensions connected to the PBX. A
message can contain the "%" symbol, which requires a number to be entered in its place when the message
is selected at an extension.
Depending on the content of the preprogrammed messages, this feature can be used to record a variety of
information, which can be output on SMDR to, for example, a connected PC.
[Example]
If message 1 is preprogrammed as "Started work", and message 2 as "Finished work", employees can sign
in by selecting message 1 when starting work, and sign out by selecting message 2 when finishing. A
connected PC can then be used to generate employee work records.
Conditions
• Up to seven "%"s can be stored for each message.
Programming References
PC Programming Manual
2.8.8 [2-6-1] Numbering Plan—Main—Features—Printing Message
2.12.9 [6-8] Hotel—Main—SMDR for External Hotel Application 2—Printing Message 1–8
PT Programming Manual
None
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording)
2.1 Capacity of System Resources
Operating Manual References
1.3.50 Printing Message
214 Feature Manual