Special Carrier Access Code - Panasonic KX-TDA100 Feature Manual

1.16 S
[803] SMDR Skip Perforation
[804] SMDR Outgoing Call Printing
[805] SMDR Incoming Call Printing
Feature Manual References
1.3.8 Call Transfer
1.3.19 COS (Class of Service)
1.4.5 DID (Direct Inward Dialing)
1.4.7 DISA (Direct Inward System Access)
1.8.5 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
1.9.3 ICD Group Features—Log-in/Log-out
1.13.13 PRIVATE NETWORK FEATURES
2.1 Capacity of System Resources

1.16.2 Special Carrier Access Code

Description
If the PBX has access to multiple telephone companies, a Special Carrier Access code assigned through
system programming is required every time a CO line call is made without using ARS.
A pause of a preprogrammed length will be automatically inserted between the user-dialed Special Carrier
Access code and the subsequent digits. (→ 1.13.4 Pause Insertion)
Conditions
• TRS
Toll Restriction (TRS) checks only the dialed telephone number excluding the Special Carrier Access
code. (→ 1.17.6 TRS (Toll Restriction))
• ARS
A pause is not automatically inserted between the user-dialed access code and the subsequent digits
when ARS mode is enabled. (1.1.3 ARS (Automatic Route Selection))
• If this PBX is installed behind an existing host PBX:
A Special Carrier Access code and a Host PBX Access code should be assigned separately—these
codes cannot be assigned together as one code. (→ 1.8.5 Host PBX Access Code (Access Code to
the Telephone Company from a Host PBX))
Programming References
PC Programming Manual
2.13.3 [7-3] Special Carrier Code
PT Programming Manual
[303] Special Carrier Access Code
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
2.1 Capacity of System Resources
284 Feature Manual