Static Gateway; System Name - AJA Ki Pro Ultra Installation & Operation Manual

50.4 STATIC GATEWAY

50.5 SYSTEM NAME

Ki Pro Ultra v1.2r1
This parameter determines the gateway or router used by Ki Pro Ultra on your LAN for
TCP/IP networking.
Figure 17. Static Gateway Screen with Keypad
variable
NOTE: Without a properly configured default gateway (whether you have a router/gateway or not),
Ki Pro Ultra will be unable to see other Ki Pros on the network, although you may still be able
to control the Ki Pro Ultra via a web browser. Also, without a proper gateway defined, the
discovery feature "Available Ki Pros—Click to Refresh" on the Network web page will not work
correctly and list other Ki Pros or FS1s on the network.
This parameter defines a name for Ki Pro Ultra and gives it a unique identifier. This same
name is used both when displaying systems via the web interface.
variable
Using the Adjust buttons, enter a gateway compatible with
your LAN (if you have one). This is only needed for Static IP
configurations.
NOTE: If 50.1 is set to DHCP, the default gateway will be
assigned by the DHCP server.
NOTE: If 50.1 is set to Default Addr, the default gateway is:
10.0.0.1.
Using the User Control Knob, enter a name for Ki Pro Ultra.
Using the User Control Knob, select the characters for each
of the up to 20-character name. The character set allowed
is: 0 through 9, '-' , ' . ' , A through Z (uppercase) and a through z
(lowercase).
Default: Ki Pro Ultra
56
www.aja.com