Networking Ki Pro Ultra Using A Static Ip Address - AJA Ki Pro Ultra Installation & Operation Manual

Networking Ki Pro
Ultra using a Static
IP Address
Ki Pro Ultra v1.2r1
NOTE: If Ki Pro Ultra fails to find a DHCP server via its network connection, it will fall back to using the
factory default static IP of 192.168.0.2—or whatever IP address you've previously defined.
AJA recommends you define a Static IP address with parameter 50.2 so you'll be prepared in
the event your DHCP server fails.
To set a static IP address for Ki Pro Ultra, you'll have to make some simple Parameter
menu selections. The illustration below shows the four menu selections you need to
make, while entering the information provided to you by your IT administrator (as
discussed earlier).
Figure 7. Configuring Ki Pro Ultra with a Static IP Address
27 www.aja.com