AJA Ki Pro Ultra Installation & Operation Manual page 62

Ki Pro Ultra v1.2r1
For direct connections between a computer and Ki Pro Ultra, you may elect to use the
Static Addr selection. This allows you to select an IP address for Ki Pro Ultra and apply it.
For example, you could enter 192.168.0.2 as an IP address. Then, to see Ki Pro Ultra's web
interface, you would type the following in the web browser:
http://192.168.0.2
NOTE: Your computer or network must be configured to access this IP address. You may need to
make changes to your network settings on your host computer to access this IP address.
NOTE: If you change the Static IP address of the Ki Pro Ultra camera, you may need to power cycle the
Ki Pro Ultra so that the host computer correctly identifies the new IP address.
Figure 19. Static IP Address Configuration
62
www.aja.com