Controls; Front Panel; Buttons - AJA Ki Pro Ultra Installation & Operation Manual

Controls

Two PAK
Media Slots
PAK Media
Cartridges

Front Panel

Buttons

Power ON/OFF Button:
Ki Pro Ultra v1.2r1
Figure 2. Ki Pro Ultra Operator Side Controls
PAK Media
Transport Control
Slot Eject
Button
The Ki Pro Ultra front panel includes:
• Transport controls
• Headphone volume control and headphone jack
• Multi-purpose User Control Knob for jog and selection functions
• Large 1280 x 720 TFT LCD display with Video Monitor and Menu/Status Overlays
• Additional selection buttons to quickly access the overlay display modes:
• Configuration menus
• Status display
• Video monitor overlay display options
• Media management
Controls system power ON/OFF and shows when power is ON (when illuminated) or OFF.
NOTE: When power is first applied to Ki Pro Ultra, the unit powers up immediately (without pressing
the button. This facilitates a quick return to operation if there is a power interruption.
In normal operation to turn power on, press the button once. It isn't necessary to press
hard—it's a "soft" button sensed by the processor inside. Pressing the button will begin
power-up and display start-up progress on the alphanumeric display.
To power down, press and hold the power button down for 3 seconds while the display
counts down. This process prevents accidental power-off during normal operation. You
can abort the power-down process by simply removing your finger from the power
button before the 3 seconds have elapsed.
Status overlay
Power
On/Off
Buttons
14
VU Meter overlay
User Control Knob
Volume Control
Headphone
Jack
Overlay
Mode
Select
Buttons
www.aja.com