Networking Ki Pro Quad Using A Static Ip Address - AJA Ki Pro Quad Installation & Operation Manual

4k / ultrahd / 2k / hd solid state file based recorder

Hide thumbs Also See for Ki Pro Quad:

Table of Contents

Networking Ki Pro

Quad using a Static

IP Address

Ki Pro Quad v5.2r3

To set a static IP address for Ki Pro Quad, you'll have to make some simple Parameter

menu selections. The illustration below shows the four menu selections you need to

make, while entering the information provided to you by your IT administrator (as

discussed earlier).

Figure 9. Configuring Ki Pro Quad with a Static IP Address

For parameters 50.2, 50.3, and 50.4, you will be setting IP addresses that consist of "octets"

NOTE:

separated by a period (i.e., 10.0.180.0). The Select button selects the octet and then the Adjust

buttons select the desired number. Pressing Select again advances to the next octet. At the

final octet, the address will flash—pressing Select at that point confirms the setting.

www.aja.com

Table of Contents