Playback Image Division; Hdmi Out; Hdmi/Edid Override; Sdi Monitor Output - AJA Ki Pro Ultra Installation & Operation Manual

1.65 Playback Image
Division

1.66 HDMI Out

Helpful HDMI configuration
guidelines:
1.68 HDMI/EDID
Override

1.8 SDI Monitor Output

Ki Pro Ultra v1.2r1
This parameter is used to select between Square Division or Two Sample Interleave
output format (4K and UHD signals only). Menu options are:
Auto (default)
Square
2SI
NOTE: For PRORES recorded files, there is no way to record image division format information (VPID
data is not recorded).
NOTE: If Menu 1.6 "SDI Out" has one of the following SDI outputs selected, playback is automatically
selected and the "Playback Image Division" parameter setting has no effect.
• SDI 1 RGB
• SDI 1 YCbCr
This parameter determines whether scaled or full raster video will be output.
NOTE: Full Raster output disables the Super Out feature; superimposed timecode and transport state
is not possible with a 4K or UltraHD HDMI output.
Crop
Crop and Scaled
Scaled (Default)
Full Raster
• Determine your video source format and frame rate.
• Decide whether you want a Full Raster or Scaled output.
• Determine whether your connected device can support 4096x2160 or 3840x2160.
• Remember that the Progressive Playback menu parameter needs to be configured for
Progressive for HDMI output.
This parameter determines whether the HDMI Output is auto-negotiated with the
receiving device via EDID (extended display identification data) or via a specified output
type.
These are the options:
• Auto (default) – The HDMI output is negotiated automatically with the receiving device
via EDID
• 10-bit YCbCr – Configures the HDMI output for 10-bit YCbCr
• 8-bit RGB – Configures the HDMI output for 8-bit RGB
• 4K 4:2:0 (High FR)
NOTE: Typically, you will want to simply leave the selection configured for Auto so that the
negotiation between the devices is handled automatically.
Sets the format of the SDI Monitor outputs. These are the options:
Normal (default)
Out Convert
In EtoE mode, follow the input signal image division format.
In Playback mode, follow the input signal format configuration.
Forces the output to use Square Division.
Forces the output to use Two Sample Interleave.
The HDMI output is limited to 2K or HD.
The HDMI output may produce 4K or UltraHD.
No conversion is applied to the monitoring output
Scaled video is additionally cropped to 1080 (if the source is
not already 1080)
48
www.aja.com