NOTE: If Ki Pro Ultra fails to find a DHCP server via its network connection, it will fall
Networking Ki Pro Ultra using a Static IP Address
To set a static IP address for Ki Pro Ultra, you'll have to make some simple
Parameter menu selections. The illustration below shows the four menu
selections you need to make, while entering the information provided to you by
your IT administrator (as discussed earlier).
Figure 7. Configuring Ki Pro Ultra with a Static IP Address
Ki Pro Ultra File Based Recorder/Player v3.3r1
back to using the factory default static IP of 192.168.0.2—or whatever IP address
you've previously defined. AJA recommends you define a Static IP address with
parameter 50.2 so you'll be prepared in the event your DHCP server fails.
Use the User Control Knob to
navigate to Con g item 50.1
Use the User Control Knob to
navigate to Con g item 50.1
Use the User Control Knob to
navigate to Con g item 50.2
Use the User Control Knob to
navigate to Con g item 50.3
Use the User Control Knob to
navigate to Con g item 50.4
24
www.aja.com