Daylight Savings; Screen Saver Timeout; Display Intensity; Serial Number - AJA Ki Pro Ultra Installation & Operation Manual

55.71 Daylight Savings

70.10 Screen Saver
Timeout
70.2 DISPLAY
INTENSITY

80.1SERIAL NUMBER

80.2 SW VERSION

91.1 RECALL PRESET

92.1 STORE PRESET

99.1 FACTORY RESET

Ki Pro Ultra v1.2r1
Table 1. Ki Pro Ultra Time Zone Options
BOSTON
CARACAS
BUENOS AIRES
RIO DE JANEIRO
This parameter manually sets the internal Ki Pro Ultra clock for either Daylight Savings or
Standard Time. The options are:
• Daylight Savings ON
• Daylight Savings OFF
This parameter sets the number of minutes before Screen Saver dims the Ki Pro Ultra LCD
display.
variable from 1 to 60
minutes
This parameter determines the brightness of the alphanumeric LCD display and front
panel back-lit buttons. A dimmer display uses less power.
variable
This parameter displays this Ki Pro Ultra's unique serial number (Read-only).
This parameter displays Ki Pro Ultra's software version level (Read-only).
This parameter recalls the Ki Pro Ultra to a previously saved preset configuration stored
using parameter 92.1. Push the User Control Knob to enter the Preset Recall scale and
scroll to choose the Preset (1 to 20). Press the knob to select and confirm action by
scrolling and clicking on OK or Cancel.
This parameter saves a preset configuration to the selected storage register. Use the User
Control Knob to scroll to the number of the Preset register. To store, press the knob, and
then select and press OK. The message [COMPLETE] is displayed after a successful store.
Selecting this parameter and then pressing the User Control Knob brings up the Confirm
Action screen. Press on OK to recall Ki Pro Ultra's factory default settings.
Caution!
Selecting this parameter and recalling factory defaults will overwrite the current
settings (with the exception of network settings, which are retained).
Recalling factory defaults does not affect these settings: Encode Mode, Encode Type, IP
Config, IP Address, Subnet Mask, Default Gateway, System Name, or Date and Time.
HELSINKI
CAIRO
TEL AVIV
BEIRUT
Push the User Control Knob to enter the time scale and scroll
to choose the setting. Press the knob to exit.
Push the User Control Knob to enter the intensity scale. You
can scroll to dim or brighten the alphanumeric display and
activity indicator LEDs in steps from 1 (dim) to 8 (brightest)
Default: 6
Push the knob to exit.
58
HANOI SEATTLE
SINGAPORE
JAKARTA
HONG KONG
www.aja.com