Subnet Mask; Static Gateway - AJA Ki PRO rack Operation Manual

50.3 SUBNET MASK

50.4 STATIC GATEWAY

Ki Pro Rack v4.2
and then the Adjust buttons select the desired number. Pressing Select Up again advances to
the next octet. At the final octet, the address will flash—pressing Select Up at that point
confirms the setting.
When these parameters are edited, you can abort the editing process by backing out (press
the Select down arrow button repeatedly until the edit passes the first octet). You'll notice that
after completing the edit on the last octet, the display will blink—this is an indication that the
edited IP address is about to be saved. You can save the edited IP address (press the Select
arrow up to save) or choose not to save by pressing the Select arrow down button.
This parameter determines the subnet mask used by Ki Pro for TCP/IP networking. These
are the available options:
variable
Please read the "Note" about editing IP addresses in parameter 50.2 as it also applies to
parameters 50.3 and 50.4.
This parameter determines the gateway or router used by Ki Pro on your LAN for TCP/IP
networking. These are the available options:
variable
NOTE: Without a properly configured default gateway (whether you have a router/gateway or not),
Ki Pro will be unable to see other Ki Pros on the network, although you may still be able to
control the Ki Pro Rack via a web browser. Also, without a proper gateway defined, the
discovery feature "Available Ki Pros—Click to Refresh" on the Network web page will not work
correctly and list other Ki Pros on the network.
Using the Adjust buttons, enter a subnet mask compatible
with your LAN (if you have one). This is only needed for
Static IP configurations.
NOTE: If 50.1 is set to DHCP, the default Subnet Mask will be
assigned by the DHCP server.
NOTE: If 50.1 is set to Default Addr, the default Subnet Mask is:
255.0.0.0.
Using the Adjust buttons, enter a gateway compatible with
your LAN (if you have one). This is only needed for Static IP
configurations.
NOTE: If 50.1 is set to DHCP, the default gateway will be
assigned by the DHCP server.
NOTE: If 50.1 is set to Default Addr, the default gateway is:
10.0.0.1.
58 www.aja.com