Ki Pro Ultra Shelf
AJA Fiber Modules
Ki Pro Ultra v1.2r1
Figure 29. Ki Pro Ultra Handle Assembly
1. Place the Shield with Spacer (temporary) on top of the Enclosure, aligning the holes.
2. Slide the Support into the Handle.
3. Place the Handle on top of the Shield, aligning the holes.
4. Place the Clamps on top of the Handle, aligning the holes.
5. Insert the two screws through the Clamps, Handle, Support, and Shield and into the
enclosure.
Snap the Caps over the Clamps and tear away the Spacer from the Shield.
AJA offers this rackmount shelf accepting two Ki Pro Ultra units in a 2RU footprint.
Figure 30. Ki Pro Ultra in Rackmount Shelf
AJA Fiber Modules
• Dual LC 3G Fiber Tx SFP AJA – Part # FIBERLC-2-TX
• Dual LC 3G Fiber Rx SFP AJA – Part # FIBERLC-2-RX
75
www.aja.com