Networking Ki Pro Using A Static Ip Address - AJA KiProRack Installation And Operation Manual

Networking Ki Pro
using a Static IP
Address
Ki Pro Rack Installation and Operation Manual — Remote Network Control
To set a static IP address for Ki Pro, you'll have to make some simple Parameter menu
selections. The illustration below shows the four menu selections you need to make,
while entering the information provided to you by your IT administrator (as discussed
earlier).
Configuring Ki Pro with a Static IP Address
1
Note: for parameters 50.2,
50.3, and 50.4, you will be
setting IP addresses that
consist of "octets" separated
by a period (i.e., 10.0.180.0).
For these parameters, the
Select button selects the
octet and then the Adjust
buttons select the desired
number. Pressing Select
again advances to the next
octet. At the final octet, the
address will flash—pressing
Select at that point confirms
the setting.
33