Configuration and Administration Guide
Configure Handset from the Handset Display Menu
It's recommended that you configure the handsets using the web configurator interface. Also, there
are certain parameters that you can only program through the web interface. However, you can
perform basic configuration of individual handsets from the handset's display menu. The following
procedure covers the minimum configuration required to set up a handset:
Note: To access the handset configuration settings, you must enter a PIN code (default 0000).
1. From idle mode, press the OK key, select Settings, and then press OK.
2. Choose Handset ID and press OK. When prompted for a PIN code, enter the PIN code (default
0000), and then press OK.
3. Record the IPEI for the handset: ____________________________.
4. Press Back. Select System settings and press OK. When prompted for a PIN code, enter the
PIN code (default 0000), and then press OK.
5. Select Handset settings and press OK.
6. Select Handset name and press OK.
7. Enter the user name of the handset user using the dial pad. The user name should correspond to
the user name that is assigned to the directory number on the MCD.
8. Press OK.
9. Press Yes to save.
10. Press Back repeatedly until you return to the System settings menu.
11. Select VoIP settings and press OK. When prompted for a PIN code, enter the PIN code (default
0000), and then press OK.
12. Select Accounts and press OK.
13. Select the desired account for the handset and press OK.
14