Enabling Connectivity Packages - ABB SPA-ZC 402 Installation And Commissioning Manual

SPA-ZC 402 SPA-ZC 402
5.4.1.
24
SPA/ Ethernet Adapter
SPA to IEC 61850 Gateway
Installation and Commissioning Manual
4. The Connectivity Package Installation program starts. In this dialog, click Next.
With the Back button return to the previous dialog, and with the Cancel
*
button, exit the installation wizard. This applies to all the dialogs in the
installation wizard.
5. Read the License Agreement, select the option I accept the license agreement
and click Next to continue the installation.
If the option I do not accept the license agreement is selected, the Next
*
button is not available and you cannot continue the installation.
6. Select the folder in which the application is to be installed.
To select the default folder shown at the bottom of the dialog, click Next.
*
To select another folder, click Browse, choose the folder you want and click
*
Next.
7. Click Next to begin the installation.
8. Follow the progress of the installation in a dialog, which also shows the directory
path where the files are copied to. At this point, you can still cancel the
installation by clicking Cancel.
9. A dialog opens to show that the Connectivity Package has been successfully
installed. Close the dialog and finish the installation by clicking Finish.
After installing a new CET for SPA-ZC 40x version or new
Connectivity Packages, always activate the correct Connectivity
Package version again by using the Connectivity Package Manager.

Enabling Connectivity Packages

Use Connectivity Package Manager to enable the Connectivity Packages for
SPA-ZC 402.
Only one version of each Connectivity Package can be enabled at a
time.
1. Double-click the icon on the computer's desktop to start the
Connectivity Package Manager.
2. Select the corresponding Connectivity Package to enable it for SPA-ZC 402.
3. Click OK to apply the selection, see Fig. 5.4.1.-1.
1MRS755380