ABB SPA-ZC 402 Installation And Commissioning Manual page 42

SPA-ZC 402 SPA-ZC 402
Fig. 6.8.-1 Downloading the device's configuration
42
SPA/ Ethernet Adapter
SPA to IEC 61850 Gateway
Installation and Commissioning Manual
1. Select the IEC 61850 Device object and right-click to select the CID Export.
2. If you download configuration to SPA-ZC 402 the first time, change the IP
address from default address (192.168.2.10) to new IP address according to the
planned network structure.
When the new configuration to SPA-ZC 402 is downloaded, Communication
Engineering Tool (CET) checks if the basic IP addresses are changed. If a change is
detected, CET asks whether new addresses are taken into use. If the changes are not
accepted, SPA-ZC 402 uses the old IP address from the previous configuration. The
IP addresses can be verified with, for example, IP Query Tool. For more information
about IP Query Tool, refer to Section 9.3. IP Query.
You can export a configuration in CID format from CID Export tool to hard drive.
This SCL is usually used by System Configuration tool. It is possible to export a
dataset in SCL files in different levels. If you select to export a dataset in FCD level,
for example an information report from SPA-ZC 40x contains always value quality
and time in one structure.
1MRS755380
A040029B