Controllable Analogue Set Point Information (Apc); Single Point Setting (Spg) - ABB SPA-ZC 402 Installation And Commissioning Manual

SPA-ZC 402 SPA-ZC 402
11.2.2.21.
Table 11.2.2.21.-1 Controllable analogue set point (APC)
APC class
Attribute Name Attribute Type
DataName Inherited from Data Class (refer to IEC 61850-7-2)
DataAttribute
setMag AnalogueValue
origin Originator
operTm TimeStamp
q Quality
t TimeStamp
ctlModel ENUMERATED
units Unit
sVC ScaledValue-
Config
minVal AnalogueValue
maxVal AnalogueValue
stepSize AnalogueValue
d VISIBLE
STRING255
cdcNs VISIBLE
STRING255
cdcName VISIBLE
STRING255
dataNs VISIBLE
STRING255
11.2.2.22.
94
SPA/ Ethernet Adapter
SPA to IEC 61850 Gateway
Installation and Commissioning Manual
Status-only is supported for the ctlModel.

Controllable analogue set point information (APC)

Table 11.2.2.21.-1 defines the common data class of controllable analogue set point
information.
FC
Setpoint and measured values
SP MX
SP MX
SP
ST
ST
Configuration, Description and Extension
CF
CF
CF
CF
CF
CF
DC
EX
EX
EX

Single point setting (SPG)

Table 11.2.2.22.-1 defines the common data class of single point setting.
Value/ Value
TrgOp
range
dchg
qchg
direct-with-
normal-security
see Annex A
1 ... (maxVal-
minVal)
Text
1MRS755380
SPA-ZC 402/
M/O/C
Comments
Not Supported
M Not Supported
O Not Supported
O Not Supported
M Not Supported
M Not Supported
M Not Supported
O Not Supported
AC_SCAV Not Supported
O Not Supported
O Not Supported
O Not Supported
O Not Supported
AC_DLNDA_M Not Supported
AC_DLNDA_M Not Supported
AC_DLN_M Not Supported