Table of Contents
Advertisement
NPort IA and IAW5000A-I/O
I/O Settings
DI Channels
The status of each DI (digital input) channel appears on the DI Channel Settings page.
You can also configure each channel's digital input mode and parameters by clicking on the channel. DI
channels can operate in DI mode or Event Counter mode.
Activate Event Counter mode by selecting the Counter Start field and configure the Counter Trigger by
selecting Lo to Hi, Hi to Lo, or Both from the drop-down menu. If the Counter Start field is not selected,
you can still activate the counter by using Modbus commands.
NOTE
Confirm that the Counter Filter is not set to 0; otherwise, the counter will never be activated.
Web Console: Modbus Address Mapping & I/O Setting
11-3
Advertisement
Table of Contents
