ioLogik 4000
You may test if the analog output channel really
works over the network. Click on the "Test" tab on
the "Config" page. Scroll the output level, and then
press "Test." At this point, you can change the
level of the analog output point.
Related Models
M-4402
M-4410
Temperature Sensing Modules
ioLogik 4000 provides RTD (Resistance Temperature Detector) and TC (Thermocouple) temperature sensing
modules.
RTD
To check the temperature status, click on the I/O module from the main page. The temperature is on the "I/O
Status" tab. When the sensor is not connected or the wiring is broken, the value is "0x8000".
To check the Modbus Address, click on the "Modbus Address" tab.
Analog Output
4 AO, 4-20 mA, 12-bit, RTB
4 AO, Voltage, 0-10V, 12-bit, RTB
4-7
Configuring I/O Modules