I/O Settings; Di Channels - Moxa Technologies NPort IA5000A-I/O series User Manual

NPort IAW5x50A-6I/O

I/O Settings

DI Channels

The status of each DI (digital input) channel appears on the DI Channel Settings page.
You can also configure each channel's digital input mode and parameters by clicking on the channel. DI
channels can operate in DI mode or Event Counter mode.
Activate Event Counter mode by selecting the Counter Start field and configure the Counter Trigger by
selecting Lo to Hi, Hi to Lo, or Both from the drop-down menu. If the Counter Start field is not selected, you
can still activate the counter by using Modbus commands.
NOTE Confirm that the Counter Filter is not set to 0; otherwise, the counter will never be activated.
Power On Setting: You may configure DI channels in Event Counter mode whether or not counting begins
when powering up.
Web Console: Modbus Address Mapping & I/O Setting
9-3