Rtd Channels - Moxa Technologies ioLogik E1200 Series User Manual

ioLogik E1200 Series

RTD Channels

The current status of each RTD (Resistance Temperature Detector) channel can be viewed on the RTD Channel
page.
Click on a specific channel to access the RTD channel settings.
Select the "Enable RTD Channel" box and then select the sensor type that meets the physical attachment to the
ioLogik E1200.
The ioLogik E1200 allows you to calibrate the temperature sensors. In each channel configuration section,
follow the instructions and click Calibrate button to start the RTD sensor calibration. Each calibration requires
around 30 seconds (per channel).
The ioLogik E1200 allows you to manually adjust the current temperature reading. In each channel
configuration section, select the channel, apply the offset value, and click the "Submit" button to perform the
task.
3-10
Using the Web Console