Table of Contents
Advertisement
ioLogik R2140
Overview
The ioLogik R2140 is a remote I/O server that is designed to link sensors, transmitters, transducers, and valves
to an RS-485 network.
The ioLogik R2140 can be attached to an ioLogik E2000 server so I/O points can be accessed from within a
single IP environment. One ioLogik E2000 server can connect up to 31 ioLogik R2000 servers.
Optional Liquid Crystal Display Module (LCM)
The ioLogik R2140 supports an optional hot-pluggable liquid crystal display module (LCM) for field
management and configuration. The module can be used for on-site configuration or monitoring, and works
with any ioLogik E or R series product.
Product Features
•
8 analog input (AI) channels, mV/V/mA with wire-off detection (at 4 to 20 mA)
•
2 analog output (AO) channels for voltage or current actuator control
•
Bundled Windows utility and quick programming library for VB, VC++, BCB
•
Support for SCADA software such as Wonderware InTouch and GE Intellution iFix32
•
Configurable power-on and safe status settings for AO channels
•
Optional LCM for status display and configuration
•
NIST traceable calibration
•
ROHS compliant
Package Checklist
The ioLogik R2140 is shipped with the following items:
Standard Accessories
•
ioLogik R2140 RS-485 I/O server
Optional Accessories
•
LDP1602 ioLogik liquid crystal display module (LCM)
NOTE: Notify your sales representative if any of the above items are missing or damaged.
1-2
Introduction
Advertisement
Table of Contents
