Table of Contents
Advertisement
ioLogik R2110 Series User's Manual
Overview
Without LCD Display Module
The ioLogik R2110 is part of the R2000 series of ioLogik Remote I/O servers, which are designed
to link sensors, transmitters, transducers, and valves to an RS-485 network. The ioLogik R2110 is
differentiated from other R2000 series models by its digital I/O and its Easy View function. As an
Easy View device, the ioLogik R2110 supports an optional hot-pluggable LCD display module to
view and configure device settings.
The ioLogik R2110 can be connected to ioLogik E2000 series servers to allow each of the field
I/O points to be accessed from within a single IP environment. One ioLogik E2000 series server
can connect up to 31 ioLogik R2000 series servers.
Features of the ioLogik R2110 RS-485 Remote I/O Server
12 DI (digital input) channels, 8 DO (digital output) channels
Multi-functional I/O that supports DI/Event Counter and DO/Pulse Output
Connects to RS-485 network using Modbus protocol, allowing communication with standard
SCADA software (e.g. Wonderware InTouch or GE Intellution iFix32)
Supports optional hot-pluggable LCD module for status display and configuration
Supports remote firmware updates via RS-485
Monitoring and configuration with ioAdmin, a graphic user interface
Hardware detection through RS-485 network with ioAdmin
Modbus register settings viewable with ioAdmin
Status of each I/O accessible over RS-485 network running the MXIO DLL library (coming
soon)
Built-in watchdog timer with configurable safe DI/O channel settings
Configurable power-on DI/O channel settings
Uses one IP address per server
NOTE: ioAdmin is a utility designed by MOXA for configuration and monitroing of the ioLogik
R2110. See Chapter 3 for detailed information about ioAdmin.
With LCD Display Module
1-2
Introduction
Advertisement
Table of Contents
