NPort 5600-8-DT/DTL Series
Overview
Your NPort 5600-8-DT/DTL device server provides instant Ethernet network access to industrial devices
through a serial connection. Devices such as PLCs, meters, and sensors can use the device server to connect
to an IP-based Ethernet LAN, making the devices accessible from anywhere over a local LAN or the Internet.
The device server's space-saving design makes it ideal for many applications:
•
Central monitoring and control of card readers, alarms, and electronic gate security systems in campus
dormitories
•
Dial-up access to private company servers
•
Management of server farm devices (routers, hubs, switches) through serial console ports
•
Network access to medical diagnostic equipment
The device server provides different operation modes, such as TCP Server mode or UDP mode, to ensure
compatibility with software using standard network APIs (Winsock or BSD Sockets). Real COM and Real TTY
drivers are included to allow easy, transparent operation using virtual COM/TTY ports over a TCP/IP network.
The drivers help preserve your software investment by providing instant network access with minimum
disruption to existing systems.
Configuration can be done manually or using automatic IP protocols (DHCP or BOOTP) through the web console.
NPort Administrator, a Windows utility, is provided for straightforward installation as well as storage and
retrieval of all system parameters.
Product Features
The device server includes the following features:
•
Compact desktop size
•
Eight ports supporting RS-232, RS-422, or RS-485 operation
•
Socket operation modes including TCP Server mode, TCP Client mode, and UDP mode
•
10/100 Mbps Ethernet port(s) with auto-speed detection
•
Multiple device ports with independent selection of serial interface
•
Built-in 15 KV ESD protection for all serial signals
•
Supports SNMP MIB-II for network management
•
Changeable voice alarm for exceptions (this feature is only available for HW Rev. 1.2 and earlier of the
NPort 5600-8-DT)
Package Checklist
•
NPort 5600-8-DT or NPort 5600-8-DTL device server
•
Wall mounting and Din-Rail kits
•
Stick-on pads
•
Documentation and software CD
•
Quick installation guide (printed)
•
Warranty card
Optional Accessories
•
DK-35A: DIN-rail mounting kit (35 mm)
•
CBL-RJ45M9-150: 8-pin RJ45 to male DB9 cable, 150 cm
•
CBL-RJ45F9-150: 8-pin RJ45 to female DB9 cable, 150 cm
•
CBL-RJ45M25-150: 8-pin RJ45 to male DB25 cable, 150 cm
•
CBL-RJ45F25-150: 8-pin RJ45 to female DB25 cable, 150 cm
•
NP21101: Male DB25 to female DB9 RS-232 cable, 30 cm
Note: Optional Accessories can be ordered separately.
www.ipc2u.ru
1-2
Introduction
www.moxa.pro