Table of Contents
Advertisement
ioLogik R2140 User's Manual
Overview
The ioLogik R2140 is a remote I/O server that is designed to link sensors, transmitters, transducers,
and valves to an RS-485 network.
The ioLogik R2140 can be attached to an ioLogik E2000 server so I/O points can be accessed from
within a single IP environment. One ioLogik E2000 server can connect up to 31 ioLogik R2000
servers.
Optional Liquid Crystal Display Module (LCM)
The ioLogik R2140 supports an optional hot-pluggable liquid crystal display module (LCM) for
field management and configuration. The module can be used for on-site configuration or
monitoring, and works with any ioLogik E or R series product.
Product Features
8 analog input (AI) channels, mV/V/mA with wire-off detection (at 4 to 20 mA)
2 analog output (AO) channels for voltage or current actuator control
Bundled Windows utility and quick programming library for VB, VC++, BCB
Support for SCADA software such as Wonderware InTouch and GE Intellution iFix32
Configurable power-on and safe status settings for AO channels
Optional LCM for status display and configuration
NIST traceable calibration
ROHS compliant
Packing List
The ioLogik R2140 is shipped with the following items:
Standard Accessories
ioLogik R2140 RS-485 I/O server
Document & Software CD
Optional Accessories
LDP1602 ioLogik liquid crystal display module (LCM)
Please notify your sales representative if any of the above items are missing or damaged.
1-2
Introduction
Advertisement
Table of Contents
