Outline - Mitsubishi Electric FX3G User Manual

FX /FX /FX /FX /FX
3S 3G 3GC 3U 3UC
FX -4AD-PNK-ADP (4-channel Resistance Thermometer Data Input)
3U
1.

Outline

This chapter describes the outline of FX
1.1 Outline of Functions
The FX -4AD-PNK-ADP is an analog special adapter. Connect the FX
3U
FX /FX /FX
3GC 3U 3UC
1) Only 1 PNK-ADP unit can be connected to the FX
*1
Up to 2 PNK-ADP units can be connected to the FX
Up to 4 PNK-ADP units can be connected to the FX
(including the other analog expansion boards, analog special adapters)
2) Thermometer types Pt1000 and Ni1000 can be connected. (However, it's impossible to use both types
Pt1000 and Ni1000 with 1 adapter.)
3) The temperature data will be automatically written to the special data register of the FX
FX /FX
3U 3UC
FX Series PLC : Only 1
3S
FX /FX Series PLC : 2
3G 3GC
FX /FX Series PLC : 4 maximum
3U 3UC
including the other analog expansion
boards, analog special adapters
4th 3rd 2nd
adapter adapter adapter
Analog data
Resistance thermometer sensor type
Pt1000 and Ni1000
Description
Temperature measurement
Setting of temperature unit
Switching of types between
type Pt1000 and Ni1000
Setting of averaging time
Refer to the system configuration shown in the User's Manual - Hardware Edition to check the number of
connectable units and to configure the entire system.
*1. Only 1 analog special adapter can be connected to the FX
*2. The expansion board is not required when connecting with the FX
For the FX /FX
3S 3G
*3. FX /FX /FX
3S 3G 3GC
For FX Series PLC
3S
• 1st adapter: M/D8280 to M/D8289
• 2nd, 3rd and 4th adapters: Cannot be connected
PLC User's Manual - Analog Control Edition
-4AD-PNK-ADP (referred to as PNK-ADP).
3U
Series PLC to read the data from the 4-channel resistance thermometer.
Series PLC.
System
*1
maximum
+
+
Expansion
1st
board *2
adapter
Transfer direction
1st adapter
2nd adapter
3rd adapter
4th adapter
Series PLC a connector conversion adapter is used.
PLCs use the following special devices.
3U
Series PLC.
3S
/FX Series PLC.
3G 3GC
/FX Series PLC.
3U 3UC
FX /FX /FX / FX /FX
3S 3G 3GC 3U 3UC
Series PLC
For FX /FX /FX /
3S 3G 3GC
FX /FX Series PLC
3U 3UC
*3
Special devices
M/D8260 to M/D8269
M/D8270 to M/D8279
M/D8280 to M/D8289
M/D8290 to M/D8299
Series PLC (14-point and 24-point type).
3G
/FX
3GC 3UC
For FX /FX Series PLC
3G 3GC
• 1st adapter: M/D8280 to M/D8289
• 2nd adapter: M/D8290 to M/D8299
• 3rd and 4th adapters: Cannot be connected
1 Outline
1.1 Outline of Functions
-4AD-PNK-ADP to the FX
3S
/FX
3S 3G
Point and section to be referred to
Number of connectable

units
To check the connectable

PLC model number, refer
to Section 1.3.
For a detailed
description of wiring,

refer to Chapter 3.
For a detailed description
of special devices, refer to

Chapter 4.
For a detailed description
of a basic program, refer to
Section 4.9.
(D, DS, DSS) Series PLC.
K
L
/FX /
3G
M
/FX /
3GC
K-3