Outline - Mitsubishi Electric FX3G User Manual

FX /FX /FX /FX /FX
3S 3G 3GC 3U 3UC
FX -1DA-BD (1-channel Analog Output)
3G
1.

Outline

This chapter outlines the FX
1.1 Outline of Functions
The FX -1DA-BD is an analog expansion board. Which is connectable with the FX
3G
output the voltage/current data for up to 1 channel.
1) Only 1 1DA-BD unit can be connected to the FX
Up to 2 1DA-BD units can be connected to the FX
Only 1 1DA-BD unit can be connected to the FX
(Including other analog expansion boards, analog special adapters).
2) Either "voltage output" or "current output" can be specified.
3) The D/A conversion results will be automatically output as the values to the special data register of the
FX /FX Series PLC.
3S 3G
• FX Series PLC
3S
Only 1
including other analog expansion
boards, analog special adapters.
Analog data
Inverter, etc.
Contents
Output mode
switching
Output setting data
Error status
PLC User's Manual - Analog Control Edition
-1DA-BD (referred to as 1DA-BD).
3G
System
Connected to the option connector
Transfer direction
Series PLC.
3S
Series PLC (40-point and 60-point type).
3G
Series PLC (14-point and 24-point type).
3G
FX Series PLC
3S
For FX Series PLC
3S
Special devices
M/D8260 to M/D8269
1 Outline
1.1 Outline of Functions
/FX Series PLC to
3S 3G
Point and section to be
referred to
Number of connectable

units
To check the connectable

PLC model number, refer
to Section 1.3.
For a detailed
 description of wiring,
refer to Chapter 3.
For a detailed description
 of special devices, refer to
Chapter 4.
For a detailed description
of a basic program, refer to
Section 4.8.
G-3
A
B
C
D
E
F
G
H
I
J