FX
/FX
/FX
/FX
/FX
3S
3G
3GC
3U
FX
-4DA (4-channel Analog Output)
3U
1.2
Setup Procedure Before Starting Operation
Before starting to use the FX
FX
Check specifications
System configuration and selection
Analog data output (test program)
Buffer memory (BFM) check
When the table output function is used
Adjustment of output characteristics
Program edit
If the error status data or the output analog value
is abnormal, refer to Chapter 9 "Troubleshooting."
E-4
PLC User's Manual - Analog Control Edition
3UC
-4DA, follow the procedure below to set up the system:
3U
-4DA
3U
Refer to Chapter 1.
Outline
Refer to Chapter 2.
Refer to the common
pages.
Refer to Chapter 3.
Wiring
Refer to Chapter 4.
Refer to Chapter 5.
Refer to Chapter 6.
Refer to Chapter 7.
Refer to Chapter 8.
1.2 Setup Procedure Before Starting Operation
Outline of system:
Version number of compatible PLC
Version number of compatible
programming tool
Specifications:
Operation environment
Performance specifications
Output characteristics
System configuration:
(Refer to the analog control common
pages.)
Selection of units
Wiring:
Power supply line
Analog output line
Output mode specification:
Output mode specification program for
channel 1 to 4
Buffer memory:
Buffer memory read/write method
List of buffer memories
Details of buffer memory
Table output function:
Preparation of data table
Transfer of data table to buffer memory
Execution of table output function
Adjustment of output characteristics:
Output characteristics change procedure
Program edit:
Basic program
Convenient function program
1 Outline