Setup Procedure Before Starting Operation - Mitsubishi Electric FX3G User Manual

FX /FX /FX /FX /FX
3S 3G 3GC 3U
FX -4DA-ADP (4-channel Analog Output)
3U
1.2

Setup Procedure Before Starting Operation

Before starting analog output using the 4DA-ADP, follow the procedure below to set up the system:
FX
Specifications check
System configuration and selection
Changing of output characteristics
If the error status data or the output analog value
is abnormal, refer to Chapter 6 "Troubleshooting."
F-4
PLC User's Manual - Analog Control Edition
3UC
-4DA-ADP
3U
Refer to Chapter 1.
Outline
Refer to Chapter 2.
Refer to the common
Refer to Chapter 3.
Wiring
Refer to Chapter 4.
Programming
Refer to Chapter 5.
Outline of system:
• Compatible PLC version number
• Compatible programming tool version number
Specifications:
• Operation environment
• Performance specifications
• Output characteristics
pages.
System configuration:
(Refer to the common pages for analog control.)
• Selection of units
Wiring:
• Power supply line
• Analog output line
Programming:
• Details of special devices
• Examples of basic programs
Method of output characteristics change:
• Convenient function program
• How to use scaling instruction
1.2 Setup Procedure Before Starting Operation
1 Outline