Troubleshooting; Plc Version Number Check; Wiring Check - Mitsubishi Electric FX3G User Manual

FX /FX /FX /FX /FX
3S 3G 3GC 3U 3UC
FX -4AD-ADP (4-channel Analog Input)
3U
6.

Troubleshooting

This chapter describes troubleshooting methods and error statuses.
If the A/D conversion data is not input, or if the proper digital value is not input, check the following items:
• PLC version number
• Wiring
• Special devices
• Programs
• Error status
6.1

PLC Version Number Check

• Any versions (from Ver. 1.00 (initial version) to the latest version) of the FX
• Any versions (from Ver. 1.00 (initial version) to the latest version) of the FX
• Any versions (from Ver. 1.40 (initial version) to the latest version) of the FX
• Any versions (from Ver. 2.20 (initial version) to the latest version) of the FX
• Check the version number of the FX
6.2

Wiring Check

Check the following items for wiring:
1. Power
The 4AD-ADP needs driving power. Verify that the power supply line is properly connected. Also check that
the POWER indicator lamp of the 4AD-ADP is on.
2. Analog input line
Use 2-core twisted shielded pair cable for the analog input line. In addition, be sure to separate the analog
input line from other power lines or inductive lines.
3. Use of current input mode
To use the current input mode for a channel, be sure to shortcircuit the line between the V+ terminal and the
I+ terminal ( : channel number) of the channel. If the line is not shortcircuited, data will not be converted
into proper digital data.
PLC User's Manual - Analog Control Edition
Series PLC. The version number should be 1.20 or later.
3UC
→ For a detailed description of the version check method,
refer to A. Common Items Subsection 5.1.2.
→ For a detailed description of wiring, refer to Chapter 3.

6 Troubleshooting

6.1 PLC Version Number Check

Series are compatible.
3S
Series are compatible.
3G
Series are compatible.
3GC
Series are compatible.
3U
C-31
A
B
C
D
E
F
G
H
I
J