Alarm Operations For 3749 Telephones; Push-Button Alarm; Using The Test Alarm; Using The Personal Alarm - Avaya 3740 User Manual

Alarm operations for 3749 telephones

Note:
The alarm settings described in this chapter can only be configured in PDM or
Note:
AIWS.

Push-button alarm

The push-button
By default, long press is defined for test alarm (see
multiple press is defined for personal alarm (see

Using the test alarm

Press and hold the push-button
Depending on set parameters, following occur:
A beep is heard.
●
The orange LED flashes twice.
●
The vibrator stirs.
●
The telephone receives a notification that the alarm has been received by the system. This
●
is a system dependent feature.
An acoustic location signal (ALS) is played. See
●
A call to a predefined number is established. See
●
alarm
Note:
When the vibrator is enabled, the telephone will alternate between vibration and
Note:
sound. That is, vibration and sound are not activated simultaneously.
The ALS will no be played if the Automatic call after alarm option is enabled.

Using the personal alarm

Press the push-button
displayed. Depending on set parameters, following occur:
A beep is heard.
●
The orange LED flashes twice.
●
The vibrator stirs.
●
88
Avaya 374x DECT Telephones - User Guide
can be defined to send an alarm by a long press and by multiple press.
on page 90.
twice or more, the dialog window Personal Alarm (default) is
Using the test alarm
Using the personal alarm
until the dialog window Test Alarm (default) is displayed.
Acoustic location signal
configuring an automatic call after an
on page 88), and
on page 88).
on page 89.
3/2013